公仔箱論壇 - Powered by Discuz! Board

標題: [網絡設備] 如何link两部电脑？没有switch或router。 [打印本頁]

作者: takeho 時間: 2008-4-29 08:30 PM 標題: 如何link两部电脑？没有switch或router。

请问应该如何用cable连接我的电脑去notebook? 我的电脑是window XP, 我的notebook是window vista. 需要调些什么setting? 我想transfer一些文件。谢谢你们的帮忙。

作者: elvinooi 時間: 2008-4-29 08:46 PM

used crosslink cable.
http://www.scintilla.utwente.nl/ ... vice/crosslink.html

作者: takeho 時間: 2008-4-29 10:22 PM

原帖由 elvinooi 於 2008-4-29 08:46 PM 發表
used crosslink cable.
http://www.scintilla.utwente.nl/commissies/stores/service/crosslink.html

i link both directly by cable already,it show network connected but i can't view each other file at opposite computer. should i change any setting for it?

作者: takeho 時間: 2008-4-30 03:08 PM

还有没有人可以帮帮我？

作者: cck_my 時間: 2008-4-30 04:04 PM

XP 用 Files and Settings Transfer Wizard (Windows Easy Transfer in Vista)
在 Start->All Programs->Accessories->System Tools

作者: takeho 時間: 2008-4-30 04:43 PM

原帖由 cck_my 於 2008-4-30 04:04 PM 發表
XP 用 Files and Settings Transfer Wizard (Windows Easy Transfer in Vista)
在 Start->All Programs->Accessories->System Tools

但是我的notebook是用vista的。可以仔细一点吗？不好意思，我的电脑知识有限。。。

作者: cck_my 時間: 2008-4-30 04:58 PM 標題: 回復 #6 takeho 的帖子

在Vista, Start->All Programs->Accessories->System Tools->Windows Easy Transfer
这是一个一个步骤的Wizard, 我没有用过但应该很简易使用!

作者: takeho 時間: 2008-4-30 07:58 PM

原帖由 cck_my 於 2008-4-30 04:58 PM 發表
在Vista, Start->All Programs->Accessories->System Tools->Windows Easy Transfer
这是一个一个步骤的Wizard, 我没有用过但应该很简易使用!

先谢谢你来啦。

作者: siusiu1228 時間: 2008-4-30 08:08 PM

PC 裝多張Lan card, 用Cross 駁去notebook~~

再簡單D, 買隻Router囉!

作者: takeho 時間: 2008-4-30 11:44 PM

原帖由 siusiu1228 於 2008-4-30 08:08 PM 發表
PC 裝多張Lan card, 用Cross 駁去notebook~~

再簡單D, 買隻Router囉!

我的电脑已经有network card了。Router什么牌子可以介绍？什么价钱？

作者: teruyume 時間: 2008-5-7 02:59 AM

D-LINK DIR-655
LINKSYS 310N

Both of them support GigabyteLAN, MIMO, wireless-N

作者: takeho 時間: 2008-5-15 01:33 AM

原帖由 teruyume 於 2008-5-7 02:59 AM 發表
D-LINK DIR-655
LINKSYS 310N

Both of them support GigabyteLAN, MIMO, wireless-N

thanks for your suggestion.

作者: nietsen 時間: 2008-5-25 12:06 AM

U must get a Crosslink Lan cable. normal patch cable or network cable is Straight Lan cable. Crosslink means the twist of 1st and 3rd, 2nd and 6th twist pair. after that u need to set the IP address of each pc to 192.168.1.1 and 192.168.1.2, after tat both the subnet should be 255.255.255.0, after tat is...default gateway put it as 192.168.1.1 both. then workgroup should be the same...then share the drive as well. then only u can each other.

作者: simmonds 時間: 2008-5-26 12:17 AM

hi...i do have the similar problem on connecting my pc with router

...pls help...can u tell me how to set the ip address ? also, there're more than one network connection drivers in my pc...how i can delete those useless ones ? thanks...highly appreciated it :onion10: :onion14:

歡迎光臨公仔箱論壇 (http://os.tvboxnow.com/)